|
vert_menu
|
PMR L7 Bolt System
Finally....its
here. The L7 Bolt for the PMR. I know many of you have been
waiting patiently for it, and at last the wait is over. For
those of you unfamiliar with what the L7 Bolt System, it's
a bolt system that is designed to be the lightest possible.
The L7 is specifically designed to decrease marker "kick"
and increase accuracy. All of our bolts run faster and smoother
than any other bolt system available. Those that have tested
this bolt have said that the kick reduction from this bolt
is amazing. At any given pressure and dwell this bolt yields
about an extra 10-15 FPS over the stock bolt.
This is
our latest PMR Bolt System. As you can see in the picture
to the right, the bolt now comes with spacers to change the
operating pressure of the marker. With no spacers the bolt
system will shoot 300 FPS around 140-150 PSI. With one spacer
as shown here, the bolt will shoot 300 FPS at 150-160 PSI.
With two spacer the marker will shoot 300 FPS at 190-200 PSI.
The spacers
make the operation of the marker more adjustable to your preference.
|
PMR
L7 Installation Instructions
|
 |
The
Proto Rail is a pretty awesome marker. However the stock bolt
system has a large amount of kick when set up to shoot 300
FPS. I personally feel that the stock set-up feels a bit "chunky".
This kick, or "chunkiness", knocks you out of aim,
and ultimately makes you shoot more to hit your target. This
causes you to win less, and get shot more.
The L7
is designed to change that. Our patent pending "reduced kick/high speed internal system"
allows you to stay on target better, shoot faster, and hit
the target more quickly than ever before.
You will
be amazed at how much better your marker feels and shoots. |
|
Sarah - TechT
Shipping Girl |
To call in your order. Please call 901-405-1848
Phone Support Available Monday - Friday 10am-5pm Central |
 |
|
Be
Proactive!!!
Get
some Extra Orings!!!
As with anything
paintball, the L7 takes orings. Some common, some not so common.
If you can get them when you purchase your bolt, they'll ship for
free. This could save you a headache in the future.
Entire PMR
Rebuild Kit
Includes every oring you need to rebuild the L7
PMR Bolt.
$8.99
|
 |
6
Pack - Inner Top Hat O-rings
PMR Inner Top
Hat O-rings are special orings that you will not find anywhere else
other than here. If there is one o-ring you should keep on hand,
its this one.
$5.99
|
Gun
Sav - High Performance Grease
It is super,
super slick, and long lasting. We recommend it not because we make
it, but because its the slickest and smoothest grease we have EVER
seen.
I tested every
grease available before I decided to make this grease. Other greases
just don't cling to the parts like this stuff.
For months now
we have offered this grease to our most trusted dealers. Everyone
of them has agreed that this is better than ANY grease they have
ever used. If this wasn't the case, I would not have offered the
grease for sale to the public. I don't want to just make another
product, I want to only make the best products.
That's just
how I roll.
Try some ....you'll
love it. Its perfect for lubing up your PMR Bolt.
TechT
Gun Sav - 1oz Tub
$9.99
|
|
OFFICIAL BETA UPDATE
For those people who purchased the BETA Version of the PMR L7 Bolt,
there is now an update available for you. This update requires that
you send your bolt system to us for the updates. The updates will
increase efficiency and consistency.
The Beta Version of the PMR Bolt also has a different back section.
If you would like your back section updated to the new adjustable
back section just specify that with your return.The older rear section
allows the bolt to run at a lower pressure than the new one, but
it is not adjustable with the new sleeves. If you prefer lower pressure
operation, I would stay with the old style. If you like higher /
adjustable pressure operation I would get the new one.
Please click here to go to the returns
page. Please print off the form and send it in with your part. You
do not need an RMA for this update. Just please be sure to specify
if you want the updated rear bolt section.
Thanks,
Todd |
Beta
PMR Bolt
If you bolt looks like the one shown here you have the beta version
and you are eligible for the update
Please contact todd@techtpaintball.com if you are interested in the update.. |
 |
|
